Vibrating Feeder

Vibrating Feeder is designed for super-heavy operation condition. It has 4.5G of strong vibration intensity and extremely firm chute body structure. With 1600TPH capacity, 1.5m maximum feeding particle size and 25~45 m³ standard capacity of bin, it is able to bear 80 m³ compartment pressure, which adapts to heavy compartment pressure, high load and heavy impact and other similar poor conditions during the primary feeding operation.

Product Features: Super-heavy design and 4.5G of strong vibration intensity release better performances.

 

国内贸易: 0371-66390201

产品优势

Super-Heavy Chute Body Able to Hold High Pressure and Strong Shocks
Different from the light chute of traditional feeders which use 16# or 20# joist steel and box iron as the longitudinal beam, the super-heavy chute  Vibrating Feeder adopts large rectangular tube, able to hold high cabin pressure and strong shocks from falling materials and able to feed materials continuously.

Strong Vibration Intensity, Large Operation Capacity
Vibration intensity G-force is the key index to measure vibration machine’s performance. The stronger it is, the larger operation capacity is. Vibrating Feeder benchmarks international leading technologies and adopts advanced design philosophy and manufacturing technique. The vibration intensity is up to 4.5G, which is 30% larger than traditional devices. In the same specification, it has more operation capacity.

Efficient, Reliable & Convenient FV Super Vibrator
To satisfy higher performance and heavy load, repeated start-stop, frequency change and other poor conditions, F5X Vibrating Feeder is equipped with FV super vibrator just like a heart, which achieves reliable operation, convenient maintenance, interchange of components and high degree of commonality. The lubricating maintenance period is up to 1500 hours.

Reasonable Arrangement of Rods, Efficient Pr-screening Function
The rods are made of NM wear-resistant steel material which has long life expectancy and high screening efficiency. The installation is quite easy, too. The ladder structure formed by two sets of rods can screen out part of fine materials, so the load of primary crusher is reduced greatly.

 

工作原理

Vibrating Feeder uses a motor to drive the eccentric shaft inside the vibrator. The shaft is connected by gears with another shaft juxtaposed to each other. When these two shafts rotate, there is the exciting force. The shaft is arranged in such a way that the resulting stroke slowly pushes materials from the feed end to the discharge end. At the same time, materials are sieved to make the particles more uniform. Typically, a bar screen is equipped at the discharge end of the F5X Vibrating Feeder. Through it, materials whose sizes are smaller than the spacing between two bars are screened out and the larger-sized materials are conveyed into the crusher.

应用领域

产品结构

应用案例

  • 某钢铁厂堆料区抑尘

    客户情况: 该区域为半成品料堆放棚,在装卸过程中会有大量粉尘弥漫,经过和客户沟通协商,采用我公司的远程射雾器,很好的解决了堆料区无组织粉尘扩散难治理的问题

    生产情况: 每天不低于8小时的持续工作

相关产品

  • Vibrating Screen

    Vibrating Screen

  • 干雾抑尘主机

  • Mobile Crusher

  • JAWCRUSHER

在线留言

返回顶部

版权所有©阿特朗 豫ICP备2023012080号 服务热线:0371-66390201